Looking to replace your dirt bike grips? There are a variety of methods you can choose from to get the job done. Whether you prefer the simplicity of zip ties, the convenience of lock-on grips, or even the unconventional approach of using hair spray or gasoline, there's a solution that suits your needs.

But how exactly do you go about putting on new dirt bike grips? In this discussion, we'll explore the tools you'll need, how to prepare your handlebars, the step-by-step process of installing the new grips, and some helpful tips for maintaining and extending the life of your grips.

So, let's get started and discover the best way to ensure a secure and comfortable grip on your dirt bike handlebars.

Table of Contents

Key Takeaways

Properly preparing the handlebars is essential for installing new dirt bike grips. This includes cleaning the handlebars, inspecting for damage, and removing any dirt or old adhesive.
There are various methods for removing old dirt bike grips, such as using a razor blade or an air compressor. Care should be taken to avoid damaging the handlebars during this process.
When installing new dirt bike grips, there are different methods to choose from, including the zip tie method, lock-on grip method, and hair spray or spray paint method. The method chosen will depend on personal preference and the type of grip being used.
To maintain and extend the life of dirt bike grips, it is important to regularly clean them, avoid excessive twisting or jerking, and periodically check the tightness of the grips. Thoroughly drying the grips after cleaning is also recommended.

Tools Needed for Installing Dirt Bike Grips

To install dirt bike grips, you'll need specific tools that are essential for the installation process. One tool you may require is a razor blade or an air compressor to remove the old grips. These tools help you easily detach the worn-out grips, making way for the new ones.

Another important tool is zip ties, which are necessary for installing grips with zip ties. These ties securely fasten the grips to the handlebars, providing a firm and comfortable grip for your hands.

Additionally, a screwdriver is vital for installing lock-on grips. It allows you to tighten the screws and ensure that the grips are securely attached to the handlebars.

If you prefer using the hair spray method, you'll need hair spray or spray paint. This method involves spraying the handlebars and the inside of the grips with hair spray or spray paint, creating a sticky surface for easy installation.

Lastly, the electrical tape and gasoline method requires electrical tape and gasoline. This technique involves wrapping the handlebars with electrical tape and applying a small amount of gasoline, making the grips slide on smoothly.

Keep these tools handy for your next dirt bike grip installation, and you'll be ready to hit the trails in no time.

Preparing the Handlebars for New Grips

After removing the old grips using a razor blade or air compressor, it's important to thoroughly clean the handlebars with a towel and brake cleaner or alcohol. This step ensures that the surface is free from any debris or residue, allowing for a secure and tight grip installation.

Here is a step-by-step guide on preparing the handlebars for new grips:

Clean the handlebars: Take a clean towel and apply some brake cleaner or alcohol to it. Wipe down the handlebars, making sure to remove any dirt, grease, or old adhesive. This will provide a clean surface for the new grip to adhere to.
Inspect the handlebars: While cleaning, take the opportunity to inspect the handlebars for any damage or wear. Look for any sharp edges, cracks, or rough spots that could affect the grip installation. If you notice any issues, it may be necessary to address them before continuing.
Choose the right grip: Before installing the new grip, ensure that it's the correct size and style for your dirt bike. Consider factors such as comfort, grip pattern, and durability. Selecting the right grip will enhance your riding experience and provide the control and confidence you need.

Removing Old Dirt Bike Grips

Carefully remove the old dirt bike grips using a razor blade or air compressor, ensuring not to damage the handlebar. This step is crucial in preparing the handlebars for new grips.

To begin, take a razor blade and insert it between the grip and the handlebar. Gently work the blade around the grip, slowly peeling it away from the handlebar. Be cautious not to apply excessive force, as this could cause damage to the handlebar.

Alternatively, an air compressor can be used to remove the old grips. Simply direct the compressed air between the grip and handlebar, creating enough pressure to loosen the grip and allow for easy removal.

Once the old grip is removed, it's important to clean the handlebar thoroughly. Use a towel and a suitable cleaner such as brake cleaner, Windex, or alcohol to remove any dirt or residue. This will ensure a clean surface for the new grips to adhere to.

Installing New Dirt Bike Grips Properly

After successfully removing the old dirt bike grips and cleaning the handlebar, it's time to proceed with the proper installation of new grips. To ensure a secure and comfortable grip, follow these steps for installing new dirt bike grips properly:

Zip Tie Method:

Gather 4-5 zip ties and insert them inside the grip.
Slide the grip onto the handlebar, using the zip ties to help guide it in place.
Once the grip is fully on, carefully remove the zip ties one by one.

Lock-On Grip Method:

Slide the lock-on grip onto the handlebar.
Tighten the screw to secure the grip.
Note that lock-on grips aren't suitable for aluminum throttle tubes.

Hair Spray or Spray Paint Method:

Coat the inside of the grip with hair spray or spray paint.
Slide the grip onto the handlebar within 30-45 seconds.
Allow the hairspray to dry for 5-7 minutes.
If there's still movement, poke a small hole in the grip and apply more hairspray.

Tips for Maintaining and Extending the Life of Dirt Bike Grips

To maintain and extend the life of your dirt bike grips, it's important to follow a few key tips and techniques.

First and foremost, make sure to regularly clean your grips to remove any dirt, mud, or debris that may accumulate during your rides. Use a mild soap and water solution to gently scrub the grips, then rinse and dry them thoroughly.

Additionally, avoid excessive twisting or jerking of the grips, as this can cause them to wear out more quickly. Instead, grip the handlebars firmly and use smooth, controlled movements when riding.

Another important tip is to periodically check the tightness of your grips. Over time, they may loosen, which can affect your control and handling. If you notice any movement or slippage, simply tighten the grip by twisting it back and forth until it feels secure.

Conclusion

In conclusion, installing dirt bike grips can be done using various methods such as:

Zip ties
Lock-on grips
Hair spray or spray paint
Electrical tape and gasoline
Grip glue

It's important to properly prepare the handlebars, remove old grips, and install new grips securely. By following these steps and maintaining the grips, riders can ensure a comfortable and long-lasting riding experience.

So, gear up and hit the trails with confidence!

How to Put on Dirt Bike Grips